Microwave Repair

Restore convenience to your kitchen with our Premium Kitchen Appliance Service. We safely diagnose high-voltage components and electronic controls to fix heating issues, arcing, and turntable malfunctions. Whether it's a built-in drawer model or a countertop unit, we ensure safe and reliable operation.

Experienced Technicians90-Day Warranty

Microwave Repair Services

A microwave that runs but doesn't heat is one of the most common — and most misdiagnosed — kitchen appliance complaints. Aerotech Solution repairs countertop, built-in, over-the-range, and drawer microwaves, with technicians specifically trained in the high-voltage safety procedures these units require.

Microwaves store dangerously high electrical charge in their capacitors even after being unplugged, which is exactly why this is one appliance category we strongly discourage attempting to diagnose yourself. Our technicians follow proper discharge procedures before ever opening the cabinet, whether the issue is a failed magnetron, a worn door switch, or an unresponsive control panel.

Supported Brands

AmanaAvantiBekoBlombergCafeDanbyElectroluxEquatorFisher & PaykelFrigidaireGEGE AppliancesHaierHisenseHotpointInsigniaKenmoreKitchenAidLGMagic ChefMaytagMideaPandaSamsungSmegSMEGSummitWhirlpoolZLINELiebherr

Signs You Need Professional Microwave Repair

Not every issue means your appliance is done for, but catching these warning signs early usually means a simpler, less expensive repair.

The microwave runs but food stays cold

This is the classic sign of a failed magnetron, though a blown high-voltage diode or capacitor can produce the same symptom.

Sparking or arcing inside the cavity

Occasionally caused by stray metal, but persistent arcing without an obvious cause often means the waveguide cover has worn through.

The unit won't start even though the display works

Frequently a worn door interlock switch refusing to let the unit run for safety reasons, rather than an electronic failure.

The touchpad is unresponsive to input

A worn control membrane is a common failure point on units that have seen years of daily use.

Unusual buzzing or humming sounds during operation

This can point to a failing high-voltage transformer or capacitor and is worth having inspected before continued use.

Common Issues

  • Not heating
  • Sparks inside
  • Turntable not turning
  • Touchpad not working
  • Door stuck

Our Restoration Process

01

Multi-point Inspection

Our trained, experienced technicians perform comprehensive Electrical Diagnostics to pinpoint secondary failures.

02

Fixed Quotation

Standardized blue-book rates. No hourly surprises. Ever.

03

Precision Repair

Common replacement parts carried; model-specific parts sourced after diagnosis to restore factory performance.

Why Choose Us

Microwave repairs require specialized handling of high-voltage systems. Our technicians are trained to safely test and repair these units, extending the life of your appliance and saving you the cost of replacement.

Common Microwave Problems We Fix

Here's a closer look at the specific issues our technicians diagnose and repair most often for this appliance.

Microwave not heating

The leading cause is a failed magnetron, though a blown high-voltage diode, a failing capacitor, or a door interlock switch preventing operation can all produce the identical symptom.

Sparking or arcing inside the cavity

Stray metal or a fork left in a dish is a common everyday cause, but ongoing arcing without an obvious source often points to a worn waveguide cover or a deeper magnetron issue.

Turntable not turning

Usually a worn drive motor or a misaligned turntable coupler, both straightforward to replace once identified.

Touchpad or control panel not responding

A worn membrane behind the touchpad is the most frequent cause, particularly on higher-use countertop models.

Door won't close properly or won't stay latched

This is treated as a priority repair since the door interlock switches are a core safety feature preventing microwave operation with the door open.

Brands We Repair

Our technicians work across every brand listed in Supported Brands above. Here's our experience with a few of the ones we service most often.

GE

GE's over-the-range and countertop microwaves are common throughout the area, most often needing magnetron or door switch repairs.

Whirlpool

Whirlpool microwaves are straightforward to diagnose, and compatible control boards and switches can be sourced after diagnosis.

KitchenAid

KitchenAid's built-in drawer microwaves require careful cabinetry-safe removal and reinstallation, which our technicians are experienced with.

Samsung

We service Samsung's countertop and over-the-range microwaves, including their sensor cook and inverter technology models.

LG

LG microwave-hood combination units are common in kitchen remodels, and we carry parts for their integrated venting systems.

Frigidaire

Frigidaire microwaves are dependable units, with most repairs involving turntable motors or door switch replacement.

Microwave Installation Services

Alongside repairs, we also provide microwave installation services for both over-the-range and built-in units — whether you're replacing an existing microwave or adding one to your kitchen for the first time.

Installation requirements vary depending on your existing electrical connection, cabinet opening, mounting system, ventilation configuration, and the new unit's specifications. We'll review these details with you before scheduling to confirm a straightforward install, or flag upfront if electrical, cabinetry, or ductwork work outside our scope needs to be addressed first.

Repair vs. Replacement: Which Makes Sense?

Microwaves generally have a shorter service life than other kitchen appliances, around 7–10 years. Because a new magnetron and high-voltage components can approach a meaningful percentage of a new unit's cost, this is one appliance where the age of the unit matters more heavily in the repair-versus-replace decision.

What to consider

  • Door switch, turntable motor, and control panel repairs are affordable and worth doing on units of any age.
  • Magnetron replacement on a microwave older than 8 years is worth comparing directly against the cost of a new unit.
  • Built-in and drawer microwaves are more expensive to replace due to cabinetry integration, which often tips the decision toward repair.
  • If the unit is under warranty or recently purchased, repair is virtually always the right call.

Preventive Maintenance Tips

  • Clean spills and food splatter promptly — buildup on the waveguide cover is a common cause of arcing over time.
  • Never run the microwave empty, which can damage the magnetron since there's nothing to absorb the emitted energy.
  • Check that the door closes fully and latches securely; a misaligned door can trigger interlock switches to prevent operation.
  • Avoid using metal or metallic-trimmed dishware, a leading cause of sparking and arcing damage.
  • Have any unusual buzzing sound inspected promptly rather than continuing to use the unit, given the high-voltage components involved.

Why Homeowners Choose Aerotech Solution

Because microwaves store dangerous voltage even when unplugged, Aerotech Solution's technicians are specifically trained in safe high-voltage discharge procedures before opening any unit's cabinet. We diagnose the actual failure — magnetron, diode, capacitor, or switch — rather than defaulting to a full unit swap, and every repair is backed by a workmanship warranty with pricing agreed upfront.

Trained TechniciansCommon Parts CarriedWorkmanship WarrantyTransparent PricingExperienced Technicians

Frequently Asked Questions

Why is my microwave not heating food?

A failed magnetron is the most common cause, though a blown high-voltage diode, a failing capacitor, or a door interlock switch can produce the same symptom.

Is it safe to repair a microwave myself?

No — microwaves store high-voltage charge in their capacitors even after being unplugged, which makes DIY repair genuinely dangerous. This is one appliance we recommend always leaving to a trained technician.

Why does my microwave spark inside?

Stray metal or a fork left in a dish is a common everyday cause. Persistent sparking without an obvious source often points to a worn waveguide cover or a deeper issue with the magnetron.

How much does microwave repair cost?

Cost depends on the failed component — door switches and turntable motors are relatively affordable, while magnetron replacement costs more. We provide a fixed quote after diagnosis.

Do you repair built-in drawer microwaves?

Yes, we service built-in, drawer-style, over-the-range, and countertop microwaves across all major brands.

Is it worth repairing an older microwave?

For door switches, turntable motors, and control panels, generally yes. Magnetron replacement on a unit older than 8 years is worth comparing against the cost of a new microwave.

Why won't my microwave start even though the display is lit?

This is frequently a worn door interlock switch preventing operation as a safety measure, rather than an electronic failure.

Do you offer same-day microwave repair?

Same-day appointments may be available based on technician availability, service location and the time the request is received. Support hours are Monday–Saturday, 9:00 AM–5:00 PM Central Time.

Helpful Microwave Resources

Microwave Not Heating? What's Safe to Check and What Isn't

A microwave that runs but doesn't heat is one of the most common — and most misunderstood — appliance complaints. The turntable spins, the display lights up, the timer counts down,...

Read our full microwave repair guide

Need Microwave Repair Today?

Book online in minutes, or call our team directly. Same-day appointments may be available based on technician availability, service location and the time the request is received.

Book Your Repair

Professional Dispatch • Licensed Technicians • Common Parts Carried